welding conditions

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

But for different products and welding conditions must adapt for different welding processes, so as to make laser vision sensing based adaptive welding technology promote better.

但是针对不同的产品及焊接条件要配合以不同的焊接工艺方法，这样才能使得基于激光视觉传感的焊接过程参数自适应控制技术得到更好的推广。

Aimming at the characters of TIG helium-arc micro-gap butt welding of tantalum sheet based on ANSYS, the temperature field was calculated when the boundary conditions were different at the gap.

针对钽薄板微间隙TIG氦弧焊接方法，基于有限元分析软件A NSYS，采用数值模拟方法计算了间隙处取不同边界条件时温度场的分布。

Statistical analysis of welding arc electrical information under the conditions of different induction

不同电感条件下焊接电弧电信息的统计分析

In this article, the alloying effect and effective factors of globular and pool stage are reviewed in detail emphatically, When the character of reactive zone in Welding With alloying elements added to the covering of globular and pool stage and it's conditions of physicochemistry are discussed.

本文在讨论药皮过渡合金，熔滴和熔池阶段反应区特点及其物化条件的同时，重点对熔滴和熔池阶段合金化作用及其影响因素做了较详细的论述和分析。

The welding conditions should always be neutral or slightly oxidizing.

焊接气氛必须永远保持中性或微氧化.

Through impos-ing the boundary conditions in the temperature model, the heat source model of FSW was defined and the thermal cycle curve of the whole welding process was obtained.

在温度场模型中施加边界条件，确定搅拌摩擦焊热源模型，得到整个焊接过程中的热循环曲线，最高温度值均在各自的高塑性温度区间。

The results shown that a deformation-free joint with good weld surface appearance can be obtained with suitable welding conditions for butt-joint and lap-joint of the dissimilar materials.

结果表明，当焊接工艺参数合适时，可以获得表面成形良好、无变形的铝合金与钢的对接接头和搭接接头。

Study on Interface Reaction in Aluminium Matrix Composite under Laser Welding Conditions

铝基复合材料激光焊焊缝界面反应及影响因素的研究